Page 411 of 444

Re: Canucks Young Guns

Posted: Wed Nov 25, 2020 6:26 am
by Richardstroker69
Chef Boi RD wrote: Tue Nov 24, 2020 8:34 pm Wids is currently dealing with a crooked, dodgy general contractor who is renovating her new condo in the west end. Ole Holmes on Homes Chef here would’ve been the wiser choice

Doyle is a Gaylord
The old get the project started then bugger off treatment?

Re: Canucks Young Guns

Posted: Wed Nov 25, 2020 7:16 am
by Cousin Strawberry
Richardstroker69 wrote: Wed Nov 25, 2020 6:26 am
Chef Boi RD wrote: Tue Nov 24, 2020 8:34 pm Wids is currently dealing with a crooked, dodgy general contractor who is renovating her new condo in the west end. Ole Holmes on Homes Chef here would’ve been the wiser choice

Doyle is a Gaylord
The old get the project started then bugger off treatment?
Yup...drop off the tools at 8 then go for a materials run.
Chef will see you right after liquid lunch

Re: Canucks Young Guns

Posted: Wed Nov 25, 2020 9:57 am
by Chef Boi RD
Richardstroker69 wrote: Wed Nov 25, 2020 6:26 am
Chef Boi RD wrote: Tue Nov 24, 2020 8:34 pm Wids is currently dealing with a crooked, dodgy general contractor who is renovating her new condo in the west end. Ole Holmes on Homes Chef here would’ve been the wiser choice

Doyle is a Gaylord
The old get the project started then bugger off treatment?
That’s BW’s move, he’s always picking up supplies but never installing, just drives around. He’s even admitted as much, brags about it. He puts in a 2 hr day but charges for 8. He should’ve gone into Shipping and Receiving if he wanted chill work.

Re: Canucks Young Guns

Posted: Wed Nov 25, 2020 5:55 pm
by Cousin Strawberry
Chef Boi RD wrote: Wed Nov 25, 2020 9:57 am
Richardstroker69 wrote: Wed Nov 25, 2020 6:26 am
Chef Boi RD wrote: Tue Nov 24, 2020 8:34 pm Wids is currently dealing with a crooked, dodgy general contractor who is renovating her new condo in the west end. Ole Holmes on Homes Chef here would’ve been the wiser choice

Doyle is a Gaylord
The old get the project started then bugger off treatment?
That’s BW’s move, he’s always picking up supplies but never installing, just drives around. He’s even admitted as much, brags about it. He puts in a 2 hr day but charges for 8. He should’ve gone into Shipping and Receiving if he wanted chill work.
I'm a specialist....measure twice cut once kinda guy

Heres a tip Chef, never have any stock with you. Get the project started up then off to the gettin place/pub for lunch

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 6:07 am
by Chef Boi RD
The Brown Wizard wrote: Wed Nov 25, 2020 5:55 pm
Chef Boi RD wrote: Wed Nov 25, 2020 9:57 am
Richardstroker69 wrote: Wed Nov 25, 2020 6:26 am
Chef Boi RD wrote: Tue Nov 24, 2020 8:34 pm Wids is currently dealing with a crooked, dodgy general contractor who is renovating her new condo in the west end. Ole Holmes on Homes Chef here would’ve been the wiser choice

Doyle is a Gaylord
The old get the project started then bugger off treatment?
That’s BW’s move, he’s always picking up supplies but never installing, just drives around. He’s even admitted as much, brags about it. He puts in a 2 hr day but charges for 8. He should’ve gone into Shipping and Receiving if he wanted chill work.
I'm a specialist....measure twice cut once kinda guy

Heres a tip Chef, never have any stock with you. Get the project started up then off to the gettin place/pub for lunch
You can’t teach an old dawg new tricks, BW.

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 6:11 am
by Chef Boi RD
I guarantee you right now ole HW is pissed off about how the job has gone over budget, demanding costs to completion, pissed off the finish date schedule is long and gone, angry at the tiler, threatening not to write any more cheques until the job is done....

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 6:59 am
by Cousin Strawberry
Chef Boi RD wrote: Thu Nov 26, 2020 6:11 am I guarantee you right now ole HW is pissed off about how the job has gone over budget, demanding costs to completion, pissed off the finish date schedule is long and gone, angry at the tiler, threatening not to write any more cheques until the job is done....
Absolutely she is pissed. Didnt she move in during the reno as well? Or was she in there already?

People always underestimate how shitty it is living in the home during renos

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 7:02 am
by Cousin Strawberry
Chef Boi RD wrote: Thu Nov 26, 2020 6:07 am
The Brown Wizard wrote: Wed Nov 25, 2020 5:55 pm I'm a specialist....measure twice cut once kinda guy

Heres a tip Chef, never have any stock with you. Get the project started up then off to the gettin place/pub for lunch
You can’t teach an old dawg new tricks, BW.
My old boss in Van used to say no screw guns on cost plus jobs and when tightening screws, 2 turns in-one turn out.

He was an old chinese dude...not one of the boat people chinese but one of the railroad descendent chinese. 100+ years in canada....still cant say the letter L.

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 11:09 am
by Richardstroker69
The Brown Wizard wrote: Thu Nov 26, 2020 7:02 am My old boss in Van used to say no screw guns on cost plus jobs and when tightening screws, 2 turns in-one turn out.

He was an old chinese dude...not one of the boat people chinese but one of the railroad descendent chinese. 100+ years in canada....still cant say the letter L.
“Herro shitty wok, can I take your order prease?”

https://youtu.be/uztUV2gHgw4

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 2:59 pm
by Chef Boi RD
The Brown Wizard wrote: Thu Nov 26, 2020 7:02 am
My old boss in Van used to say no screw guns on cost plus jobs and when tightening screws, 2 turns in-one turn out.
In other words, a scum bag

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 3:37 pm
by Cousin Strawberry
Richardstroker69 wrote: Thu Nov 26, 2020 11:09 am
The Brown Wizard wrote: Thu Nov 26, 2020 7:02 am My old boss in Van used to say no screw guns on cost plus jobs and when tightening screws, 2 turns in-one turn out.

He was an old chinese dude...not one of the boat people chinese but one of the railroad descendent chinese. 100+ years in canada....still cant say the letter L.
“Herro shitty wok, can I take your order prease?”

https://youtu.be/uztUV2gHgw4
He'd say "you go dung tung to whatchamacom..."

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 3:38 pm
by Cousin Strawberry
Chef Boi RD wrote: Thu Nov 26, 2020 2:59 pm
The Brown Wizard wrote: Thu Nov 26, 2020 7:02 am
My old boss in Van used to say no screw guns on cost plus jobs and when tightening screws, 2 turns in-one turn out.
In other words, a scum bag
I learned from the best

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 4:30 pm
by Blob Mckenzie
Lol listen to the Chef.... Wasn’t that his outfit that let loose a couple thousand pounds of drywall on the #1 a couple years ago? :scowl:

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 6:57 pm
by Chef Boi RD
Doyle lives a couple blocks from The Arms Pub on Coast Meridian, home to all the rounder, riff raff, crooked ponzi schemer contractors of the Tri cities. Doyle is there now scoring some cheap vinyl flooring out of the back of an old run down Chevy van with bald tires

Re: Canucks Young Guns

Posted: Thu Nov 26, 2020 7:01 pm
by Cousin Strawberry
Chef Boi RD wrote: Thu Nov 26, 2020 6:57 pm Doyle lives a couple blocks from The Arms Pub on Coast Meridian, home to all the rounder, riff raff, crooked ponzi schemer contractors of the Tri cities. Doyle is there now scoring some cheap vinyl flooring out of the back of an old run down Chevy van with bald tires
:lol:

PoCo sounds like Whalley in the 80s